Guide · Businesses · 4 min read · Updated 17 November 2026
How Much Does a Shop Front or Roller Shutter Cost in the UK?
Short answer
A typical aluminium shop front with an entrance door and laminated glass costs £3,500–£9,000 in the UK. Traditional timber shop fronts start from about £8,000. An electric roller shutter for a standard shop front is usually £1,500–£3,500, a perforated shutter £1,800–£4,000 and a collapsible security gate £500–£1,400. Shutter repair call-outs are typically £120–£350 plus parts.
Guide prices for shop fronts and shutters
Shop fronts and shutters are made to measure, so every quote depends on the width and height of the opening, the materials and the level of security needed. The ranges below are realistic 2026 guide prices for a typical single retail unit on a UK high street or parade, supplied and fitted. Larger frontages, corner units, curved glass and heritage joinery sit above these figures, while simple replacements on a standard opening can come in at the lower end.
Consents, signage and structural work such as new steel beams are usually priced separately from the shop front itself, so check what each quote includes.
| Item | Guide price | Notes |
|---|---|---|
| Aluminium shop front | £3,500–£9,000 | Single unit with entrance door and laminated glass |
| Traditional timber shop front | from £8,000 | Bespoke joinery with pilasters, fascia and stall riser |
| Electric roller shutter | £1,500–£3,500 | Typical shop front width, steel or aluminium laths |
| Perforated roller shutter | £1,800–£4,000 | Lets displays and lighting show through when closed |
| Collapsible security gate | £500–£1,400 | Per opening, depending on size and locking |
| Shutter repair call-out | £120–£350 | Diagnosis and common repairs, motors and parts extra |
What drives the cost of a shop front
Size is the obvious factor, but glass specification often matters more than people expect. Shop fronts normally use laminated or toughened safety glass, and thicker laminated glass for better resistance to attack costs more and needs heavier framing. Double glazed units add thermal performance and weight. Automatic sliding doors cost considerably more than a manual swing door, and accessible entrances with level thresholds may need groundwork at the doorway.
The framing system also counts. Standard aluminium sections in a stock colour are the most affordable, while slimline frames, bespoke colours and integrated shutter boxes add cost. Traditional timber fronts involve skilled joinery, mouldings, stall risers and often sign-written fascias, and in conservation areas the design may need to match local guidance closely.
- Overall width and height of the frontage
- Glass type and thickness, and whether it is double glazed
- Door type: manual swing, power assisted or automatic sliding
- Framing: stock aluminium, bespoke colour or timber joinery
- Any structural work, such as a new beam above the opening
What drives the cost of a roller shutter
Roller shutter prices depend on width, height, lath type and how the shutter is operated. Solid steel laths are strong and cost-effective. Aluminium is lighter and resists corrosion, while insulated aluminium suits doors used for loading or warehouses. Perforated and punched laths cost a little more but let window displays show through, which many councils prefer on high streets.
Electric operation with a tubular motor and key switch or remote is now standard for most shops, but adds cost compared with a manual push-up or gear-operated shutter. Larger shutters need stronger motors, heavier barrels and sometimes an external box. Where the box must be hidden behind the fascia or inside the shop, extra building work may be required.
Extra costs to plan for
Planning permission fees, listed building consent applications and design drawings are separate from the build cost and can add weeks to the timetable. Signage often needs its own advertisement consent. Temporary boarding may be required between removing the old front and fitting the new one, and out-of-hours working to avoid closing the shop usually costs more.
Electric shutters need a power supply close to the box, which an electrician may need to install. Over time, shutters benefit from regular servicing, and some insurers ask for proof that shutters are maintained, so it is sensible to budget for an annual service visit.
How to get an accurate quote
Take clear photos of the whole frontage from across the street and close-ups of the existing frame, fascia and any shutter box. Note the approximate width and height of the opening, whether the property is listed or in a conservation area, and how you want to use the front: displays, trading hours, deliveries and whether you need the shutter open while you are inside. A survey will confirm structural details, such as the condition of the beam above the opening and where a shutter box can sit, which is essential for a firm price.
If you lease the unit, check your lease before ordering. Many commercial leases require the landlord's written consent for alterations to the shop front, and some specify the style or colour.
Aluminium or timber: cost over time
Aluminium shop fronts cost less to buy than bespoke timber and need very little upkeep. A powder-coated finish only needs washing down a few times a year, and the frames do not rot or swell. They suit modern units, retail parks and most high streets outside sensitive historic areas, and they can carry large panes of laminated glass on slim sections.
Timber shop fronts cost more at the outset and need repainting every few years, plus attention to cills and joints where water can sit. In return they suit period buildings, are often expected in conservation areas and can be repaired rather than replaced when one section is damaged. When comparing quotes, think about the whole life of the front, including painting and maintenance, rather than only the fitted price.
Ways to keep costs under control
Reusing a sound existing frame and only replacing glass or doors can be much cheaper than a full new front. Choosing stock colours and standard sections helps, as does planning the shutter at the same time as the shop front so the box and guides can be built in neatly rather than added afterwards. Combining fit-out work, such as signage and lighting, into one programme can reduce the number of separate site visits and the time the shop spends boarded up.
Questions people also ask
How much does it cost to replace the glass in a shop front?
Replacing a single pane is usually much cheaper than a new shop front, but the price depends on the size and type of glass. Large laminated panes are heavy and need several fitters or lifting equipment, and an emergency board-up may be needed first. Ask for a quote based on the exact glass specification needed for that location.
Are electric shutters much more expensive than manual ones?
Electric shutters cost more because of the motor, controls and wiring, but for most shops they are the practical choice. A typical electric roller shutter costs £1,500–£3,500 fitted. Manual shutters can suit small openings that are rarely used, but lifting a heavy shutter every day is hard work and wears the shutter faster.
Do I need planning permission for a new shop front?
Usually, yes. Replacing or altering a shop front normally needs planning permission because it materially affects how the building looks, and external shutters usually do too. Listed buildings need listed building consent. Check with your local planning authority early, as approval can take several weeks and may shape the design.
Written and checked by the Shop Fronts and Shutters team. Read our editorial policy.
More guides
Do You Need Planning Permission for a Shop Front or Shutter?
In most cases, yes. Replacing or altering a shop front usually needs planning permission because it materially affects the appearance of the…
Solid vs Perforated Shutters vs Security Grilles: Which to Choose?
Solid roller shutters give the most physical protection and privacy but often face planning resistance on high streets. Perforated or punched…
Roller Shutter Repair and Maintenance: A Guide for Shop Owners
Most roller shutter breakdowns come from worn motors, damaged laths, misaligned guides, faulty switches or broken springs on manual shutters. Owners…
Replacing a Shop Front: What Happens, Step by Step
Replacing a shop front starts with a survey and design, followed by any planning, listed building or landlord consents. The front is then made to…
Get a free shop fronts and shutters quote
Tell us what you need and we'll come back with a clear price.
Request a quote