Shop Fronts and Shutters

Shop Fronts and Shutters glossary

The terms you'll come across, explained in plain English.

Bottom rail
The heavier rail at the base of a roller shutter curtain that meets the ground and often carries the locks. It takes most knocks and wear.
Collapsible gate
A steel lattice gate that folds to the side of an opening. It needs no box above the opening and is often used on doorways and inside shops.
Fascia
The horizontal board above the shop window that usually carries the shop's name. Its size and proportion are often controlled in conservation area design guidance.
Guide rails
The vertical channels on each side of an opening that the shutter curtain runs in. Strong, well-fixed guides are vital to stop the curtain being forced out.
Laminated glass
Two or more sheets of glass bonded with a plastic interlayer. If broken, the pieces stay attached to the interlayer, which improves safety and makes break-ins harder.
Lath
One of the interlocking horizontal strips of steel or aluminium that form the curtain of a roller shutter. Laths can be solid, perforated, punched or insulated.
LPS 1175
A Loss Prevention Standard published by the Loss Prevention Certification Board that rates the resistance of security products such as shutters and doors to forced entry. Some insurers refer to it.
Mullion
A vertical bar in a shop front frame that divides the glazing into separate panes and adds strength to large openings.
Perforated shutter
A roller shutter whose laths have small punched holes, letting light through and allowing displays to be partly seen when the shutter is closed.
Pilaster
A flat decorative column on each side of a traditional shop front that frames the window and supports the fascia visually. Councils often expect original pilasters to be retained.
Shutter box
The housing above or behind a shop opening that contains the rolled-up shutter curtain and barrel. Concealing it behind the fascia often helps with planning approval.
Stall riser
The solid panel below the shop window, between the pavement and the glass. It protects the glazing from kicks and knocks and is a key feature of traditional shop front design.
Toughened glass
Glass heat treated to be several times stronger than ordinary glass. When it breaks, it shatters into small blunt pieces, making it suitable for doors and safety-critical panes.
Transom
A horizontal bar in a shop front frame that divides glass into upper and lower panes, often separating the door from a fanlight above.
Tubular motor
An electric motor that fits inside the shutter barrel and turns it to raise and lower the curtain. Most modern shop shutters use one, usually with a brake and manual override.

Get a free shop fronts and shutters quote

Tell us what you need and we'll come back with a clear price.

Request a quote