Shop Fronts and Shutters FAQs
Straight answers to the questions we're asked most.
Do I need planning permission for a new shop front?
Yes, in most cases a new or altered shop front needs planning permission because it changes the appearance of the building. Like-for-like repairs usually do not. Listed buildings need listed building consent, and conservation areas often have stricter design guidance. Check with your local planning authority before ordering.
Do I need planning permission for a roller shutter?
External roller shutters usually need planning permission, and many councils restrict solid external shutters because they create dead frontages. Internal shutters fitted behind the glass often do not need permission, though this varies. Perforated or lattice shutters are more likely to be approved.
What glass should a shop front use?
Shop fronts usually use laminated glass, which stays in place when broken and resists smash-and-grab attempts. Toughened glass is common in doors. Higher-risk premises may use thicker anti-bandit laminated glass. Safety glazing is required in critical locations such as doors and low-level panes.
How long does it take to fit a shop front?
Most aluminium shop fronts are fitted in one or two days, often overnight or on a closed day. Fabrication usually takes three to six weeks after survey. Bespoke timber fronts take longer to make, typically six to ten weeks, and two to four days to fit.
How much does a roller shutter cost?
An electric roller shutter for a typical shop front costs around £1,500–£3,500 fitted, depending on width, materials and controls. Perforated shutters typically cost £1,800–£4,000. Manual shutters are cheaper, while higher security ratings, insulated laths and special finishes increase cost.
Are internal or external shutters better?
External shutters protect the glass as well as the premises, but they are more visible and more likely to need planning permission. Internal shutters sit behind the glass, keep the street elevation cleaner and are easier to get approved. The best choice depends on security needs, planning rules and insurer requirements.
What is LPS 1175?
LPS 1175 is a security standard from the Loss Prevention Certification Board that tests building products such as shutters, grilles and doors against forced entry by attackers with specific tools and time. Higher ratings resist more determined attacks. Some insurers ask for LPS 1175 rated products for higher-risk premises.
Why is my roller shutter stuck?
A roller shutter can stick because of a failed motor, tripped power, faulty key switch, bent laths, damaged guide rails or a problem with the safety edge or limits. Manual shutters may have broken springs. Avoid forcing it, as this can cause more damage. An engineer can diagnose and fix most faults in one visit.
How often should roller shutters be serviced?
Most commercial roller shutters should be serviced at least once a year, and busy shutters used several times a day benefit from servicing every six months. A service includes lubrication, checking fixings, testing safety devices and adjusting limits, which reduces breakdowns and extends the shutter's life.
Can a shop front be fitted without closing the shop?
Yes, most installers can work overnight, early morning or on a closed day to minimise disruption. The old front is removed, the opening secured and the new front fitted in as short a window as possible. Larger or more complex fronts may need temporary boarding while work continues.
Do shop fronts need to be accessible?
New shop fronts should provide reasonable access for disabled customers, including suitable door widths, level or ramped thresholds and manageable door opening forces. Approved Document M in England gives guidance, and businesses also have duties under the Equality Act 2010 to make reasonable adjustments.
Can I replace just the glass in my shop front?
Yes, broken or damaged glass can usually be replaced without changing the frame. The glazier measures the pane, orders matching laminated or toughened glass and fits it into the existing frame. Emergency boarding can secure the premises while the replacement is made.
Get a free shop fronts and shutters quote
Tell us what you need and we'll come back with a clear price.
Request a quote